5.7.2
MLD Snooping
5.7.2.1
MLD Snooping Settings
Use the following window to implement the settings on MLD Snooping
(Multicast Listener Discovery Snooping) and display its settings.
Choose L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Settings to display the following window.
In the section of Global Settings, you can configure the following
parameter.
Parameter
Global State
Click Apply to reflect the change.
In the section of VLAN State Settings, you can configure the following
parameter.
Parameter
VID
Click Apply to add new entries based on the information specified.
In the section of MLD Snooping Table, you can configure the following
parameter.
5.7.2 MLD Snooping 5.7.2.1 MLD Snooping Settings
Figure 5-52 MLD Snooping Settings
This parameter enables or disables the global state of
MLD Snooping.
Enter the VLAN ID you use. The range is from 1 to
4,094.
5 L2 Features
Overview
Overview
147