Poe Configuration; Poe Global Configuration - Panasonic GA-ML Series Manual

3.7

PoE Configuration

3.7.1
Use the following window to
on a device regarding PoE and to display its settings.
Choose System > PoE Configuration > PoE Global Configuration to
display the following window.
In the section of the PoE Global Configuration, you can configure the
following parameters.
Parameter
Power
Budget/
Fan Speed
Power Usage
Threshold for
Sending
Traps
Power
Management
Method
SNMP Traps
3.7 PoE Configuration 3.7.1 PoE Global Configuration

PoE Global Configuration

Figure 3-20 PoE Global Configuration
This parameter chooses the power supply and fan speed, which
can be supplied by this device.
This parameter displays the threshold of the power supply for
sending traps. The factory default settings is "50%".
The method of power supply is displayed; when the power
supply exceeds the power budget. The factory default settings is
set to "denying (or rejecting) the next port connection".
Denying the Next
Port Connection
Low-priority Port
Becomes
Shutdown
This parameter configures the PoE power supply traps. The
factory default settings is set to "disabled".
implement the common configuration
Overview
This option allows you to stop the power
for the port, which is connected right
before exceeding the power budget.
The power supply for the port with the
lowest priority becomes stopped. If the
priority is the same, the power supply for
the port with the larger port-number
becomes stopped.
3 System
39