Mac Acl - Panasonic GA-ML Series Manual

8.1.1

MAC ACL

After you choose Create/Update from MAC ACL, the following window
is displayed.
Figure 8-4 ACL Configuration Wizard (Configuration of MAC ACL)
You can configure the following parameters.
Parameter
Sequence Number
Source
Destination
Specify Ethernet Type Choose the Ethernet-type option. The options available
Enter the ACL rule number. The range is from 1 to
65,535. Choose Auto Assign to automatically generate
the ACL rule number for this entry.
Choose and enter the source MAC address information.
The options available are as follows.
• Optional - Evaluates the optional source traffic
according to this rule condition.
• Host - Enter a source-host MAC address.
• MAC - Enter a source MAC address and the
Wildcard value in the entry field displayed.
Choose and enter the destination MAC address
information. The options available are as follows.
• Optional - Evaluates an optional destination traffic
according to this rule condition.
• Host - Enter a destination-host MAC address.
• MAC - Enter a destination MAC address and the
Wildcard value in the entry field displayed.
are aarp, appletalk, decent-iv, etype-6000, etype-
8042, lat, lavc-sca, mop-console, mop-dump, vines-
echo, vines-ip, xns-idp and arp.
8 ACL (Access Control List)
8.1.1 MAC ACL
Overview
232