Firmware Backup To Tftp - Panasonic GA-ML Series Manual

14.2.1.6 Firmware Backup to TFTP

Use the following window to save the backup copy of firmware existing in
a switch into a TFTP server.
Choose Tool > Firmware Upgrade & Backup > Firmware Backup to
TFTP (Servers) on the tool-bar to display the following window.
Figure 14-7 Firmware Upgrade from TFTP (Servers)
You can configure the following parameters.
Parameter
TFTP Server IP
Source File
Destination File
Click Backup to start performing a backup.
Enter an IP address of a TFTP server.
• IPv4 - Choose and enter an IPv4 address of a TFTP
server.
• IPv6 - Choose and enter an IPv6 address of a TFTP
server.
Enter the source file-name and path of a firmware file in
a switch. The number of characters for this field can be
up to 64.
Enter the destination file-name and path of a firmware
file to be backed up into a TFTP server. The number of
characters for this field can be up to 64.
14.2.1.6 Firmware Backup to TFTP
Overview
14 Tool Bar
411