Dhcp Snooping Binding Entry - Panasonic GA-ML Series Manual

Hide thumbs Also See for GA-ML Series:
Table of Contents

Advertisement

9.7.1.1.5

DHCP Snooping Binding Entry

Use the following window to implement the settings on the DHCP
Snooping binding entry and display its settings.
Choose Security > SAVI > IPv4 > DHCPv4 Snooping > DHCP Snooping
Binding Entry to display the following window.
In the section of DHCP Snooping Manual Binding, you can configure
the following parameters.
Parameter
MAC Address
VID
IP Address
Port
Expiry
Click Add to add new entries.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 9-45 DHCP Snooping Binding Entry
Enter a MAC address of the DHCP Snooping binding
entry.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Enter an IP address of the DHCP Snooping binding
entry.
Choose the port you use.
Enter the value of the valid deadline to use. The range is
from 60 to 4,294,967,295 (seconds).
9.7.1.1.5 DHCP Snooping Binding Entry
Overview
9 Security
333

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents