Panasonic GA-ML Series Manual page 359

In the section of Storm Control Port Settings, you can configure the
following parameters.
Parameter
From Port/ To Port
Type
Action
Level Type
PPS Rise
PPS Low
Click Apply to reflect the change.
If you choose Kbps
Choose the port you use.
Choose the storm-attack type to control it. The options
available are Broadcast, Multicast and Unicast. If you
configure Shutdown as an action, unicast refers to (or
means) both known and unknown unicast packets. If
the number of known and unknown unicast packets
reaches the threshold specified, the port becomes
shutdown. Other than that, unicast refers to unknown
unicast packets.
Choose an action to do. The options available are as
follows.
• None - Does not filter storm packets.
• Shutdown - Shutdowns a port when reaching the
value, which is specified for the rising threshold.
• Drop - Drops the packets, which exceed the high
threshold.
Choose the level-type option. The options available are
PPS (Packets Per Second), Kbps and Level.
Enter the value of PPS rise. This option specifies the
upper rate of the packet count per second. The range is
from 1 to 255,000 (packets) per second. If you do not
specify the value of PPS low, the value equivalent to
80% of the rising-PPS specified becomes the default
value.
Enter the value of PPS low. This option specifies the low
rate of the packet-count per second. The range is from
1 to 255,000 (packets). If you do not specify the value
of PPS low, the value equivalent to 80% of the rising-
PPS specified becomes the default value.
Level Type, the following window is displayed.
from
9.13 Storm Control
Overview
9 Security
357