Configuration Restore From Rcp - Panasonic GA-ML Series Manual

14.2.2.4 Configuration Restore from RCP

Use the following window to restore the configuration of a switch from an
RCP server.
Choose Tools > Configuration Restore & Backup > Configuration
Restore from RCP (Servers) from the tool-bar to display the following
window.
Figure 14-13 Configuration Restore from RCP (Servers)
You can configure the following parameters.
Parameter
RCP Server IP
User Name
Source File
Destination File
Replace
Click Restore to start restoring.
14.2.2.4 Configuration Restore from RCP
Enter an IP address of the RCP server.
Enter the user-name of the RCP connection. The
number of characters for the name can be up to 32.
Enter the source file-name and path of a configuration
file in an RCP server. The number of characters for this
field can be up to 64.
Enter the destination path and location in a switch that
saves a configuration file. The number of characters for
this field can be up to 64.
• If you choose the running-config option, the
configuration file being executed in a switch is
restored to be overwritten.
• If you choose the startup-config option, a start-up
configuration file in a switch is restored to be
overwritten.
If you choose this option, a configuration file in a switch
is replaced by this file.
Overview
14 Tool Bar
417