Configuration Backup To Ftp Servers - Panasonic GA-ML Series Manual

14.2.2.7 Configuration Backup to FTP Servers

Use the following window to save a backup copy of the switch
configuration into an FTP server.
Choose Tool > Configuration Recovery ＆ Backup > Configuration
Backup to an FTP Server on the tool-bar to display the following
window.
Figure 14-16 Configuration Backup to the FTP Server
You can configure the following parameters.
Parameter
FTP Server IP
TCP Port (1-65535)
Username
Password
Source File
Destination File
Click Backup to start making a backup.
14.2.2.7 Configuration Backup to FTP Servers
Enter an IP address of an FTP server.
Enter the TCP port of the FTP connection.
Enter the user-name of the FTP connection. The number
of characters for the name can be up to 32.
Enter the password of the FTP connection. The number
of characters for the name can be up to 15.
Enter the source-file name and its path of a
configuration file on a switch. The number of characters
for this field can be up to 64.
• If you choose the running-config option, the
configuration file, which is in progress of being
executed by a switch, is backed up.
• If you choose startup-config option, the start-up
configuration file on a switch is backed up.
Enter the destination path and its location on the RCP
server where a configuration file is saved. The number
of characters for this field can be up to 64.
Overview
14 Tool Bar
420