Panasonic GA-ML Series Manual page 259

In the section of Add ACL Rule, you can configure the following
parameters.
Parameter
Sequence Number
Action
Source
Destination
Time Range
Click Apply to add a new ACL rule.
Click Back to return to the ACL Access List window.
Enter an ACL rule-number. The range is from 1 to
65,535. If you do not specify the number, it is
automatically generated.
Choose an action to execute with this rule. The options
available are Permit and Reject.
Choose and enter the source information. The options
available are as follows.
• Optional - Evaluates the optional source traffic
according to this rule condition.
• Host - Uses and enters a source host IPv6 address.
• IPv6 - Enter the value of a source IPv6 address and
prefix-length in the entry field displayed.
Choose and enter the destination information. The
options available are as follows.
• Optional - Evaluates the optional destination traffic
according to this rule condition.
• Host - Uses and enters an IPv6 address of the
destination host.
• IPv6 - Enter the value of a destination IPv6 address
and prefix-length in the entry field displayed.
Enter the name of the time-range profile to use in this
ACL rule. The number of characters for the name can be
up to 32.
8 ACL (Access Control List)
8.2.3 Standard IPv6 ACL
Overview
257