9.7.1.3.2
IP Source Guard Binding
Use the following window to implement the settings on an IP source
guard binding and display its settings.
Choose Security > SAVI > IPv4 > IP Source Guard > IP Source Guard
Binding to display the following window.
In the section of the settings on IP Source Binding, you can configure the
following parameters.
Parameter
MAC Address
VID
IP Address
From Port/ To Port
Click Apply to reflect the change.
Figure 9-53 IP Source Guard Binding
Enter a MAC address of the binding entry.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Enter an IP address of the binding entry.
Choose the port you use.
9.7.1.3.2 IP Source Guard Binding
Overview
9 Security
343