Panasonic GA-ML Series Manual page 272

Parameter
Message Code
IP Precedence
ToS
DSCP
TCP Flag
VID
CoS Apply
If you do not choose the Specify ICMP Message Type,
enter the numerical value of message code to use. The
range is from 0 to 255. If you choose the ICMP
Message Type, the numerical value of a message type
is automatically entered. This parameter is available
when you select ICMP from the Protocol Type.
Choose the value of IP Precedence to use. The options
available are routine (0), priority (1), immediate (2),
flash (3), flash-override (4), critical (5), internet (6)
and network (7).
• Value - You can enter the value of IP Precedence,
manually. The range is from 0 to 7.
• Mask - Enter the value of IP Precedence mask. The
range is from 0x0 to 0x7.
Choose the value of Type-of-Service (ToS) to use. The
options available are normal (0), min-monetary-cost
(1), max-reliability (2), max-throughput (4) and min-
delay (8).
• Value - You can enter the ToS value, manually. The
range is from 0 to 15.
• Mask - Enter the ToS mask value. The range is from
0x0 to 0xF.
Choose the DSCP value to use. The options available
are:
default (0) af11 (10), af12 (12), af13 (14), af21 (18),
af22 (20), af23 (22), af31 (26), af32 (28), af33 (30),
af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3
(24), cs4 (32), cs5 (40), cs6 (48), cs7 (56) and ef (46).
• Value - You can enter the DSCP value, manually. The
range is from 0 to 63.
• Mask - Enter the DSCP mask value. The range is
from 0x0 to 0x3F.
Choose the TCP flag to evaluate for this ACL. The
options available are ack, fin, psh, rst, syn, and urg.
This parameter is available when you select TCP from
the Protocol Type.
Enter the VLAN ID you use. The range is from 1 to
4,094.
• Mask - Enter the value of VLAN ID mask. The range
is from 0x0 to 0xFFF.
Choose the CoS-value to use. The range is from 0 to 7.
• Mask - Enter the CoS-mask value. The range is from
0x0 to 0x7.
8 ACL (Access Control List)
8.2.6 Extended Expert ACL
Overview
270