7.2.9
Policy Binding
Use the following window to implement the settings on a policy binding
and display its settings.
Choose QoS > Advanced Settings > Policy Binding to display the
following window.
In the section of the settings on a Policy Binding, you can configure the
following parameters.
Parameter
From Port/ To Port
Direction
Name of a Policy Map Enter the name of a policy map. The number of
Click Apply to check the content changed.
Figure 7-21 Policy Binding
Choose the port you use.
Choose a direction option. The options available are
Input and Output. Specify the entry traffic for Input
and exit traffic for Output, respectively.
characters for the name can be up to 32.
• If you choose None, a policy map is not associated
with this entry.
7 QoS (Quality of Service)
7.2.9 Policy Binding
Overview
228