Multicast Filtering Mode - Panasonic GA-ML Series Manual

5.7.3

Multicast Filtering Mode

Use the following window to implement the settings on the Multicast
filtering mode and display its settings.
Choose L2 Features > L2 Multicast Control > Multicast Filtering Mode
to display the following window.
In the section of the Multicast Filtering Mode, you can configure the
following parameters.
Parameter
VID List
Multicast Filtering
Mode
Click Apply to add new entries based on the information specified.
Figure 5-60 Multicast Filtering Mode
Enter the VLAN ID you use. You can enter its
consecutive VLAN IDs by delimiting with a comma, or
enter the range of VLAN IDs by delimiting with a
hyphen. The range is from 1 to 4,094.
Choose the Multicast filtering mode. The options
available are as follows.
• Forward Unregistered - Registered Multicast
packets are forwarded based on a forwarding table,
and then all unregistered Multicast packets are
flooded based on a VLAN domain.
• Forward All - All Multicast packets are flooded
based on a VLAN domain.
• Filter Unregistered - Registered packets are
forwarded based on a forwarding table, and then all
unregistered Multicast packets are filtered.
5 L2 Features
5.7.3 Multicast Filtering Mode
Overview
160