Table of Contents
Advertisement
10.2
DDM (Digital Diagnostic Monitoring)
10.2.1
Use the following window to implement the settings on the global
settings (which is associated with a DDM function) and DDM shutdown of
the port specified, and to display the settings.
Choose DDM > DDM Settings to display the following window.
In the section of DDM Global Settings, you can configure the following
parameters.
Transceiver
Monitoring Traps
Alarm
Transceiver
Monitoring Traps
Warning
Click Apply to reflect the change.
10.2 DDM (Digital Diagnostic Monitoring) 10.2.1 DDM Settings
DDM Settings
Figure 10-2 DDM Settings
Parameter
This parameter enables and disables the transmission of
the transceiver monitoring traps alarm.
This parameter enables and disables the transmission of
the transceiver monitoring traps warning.
10 OAM (Operations, Administration & Management)
Overview
369
Hide quick links:
Advertisement
Table of Contents
