Sntp Settings - Panasonic GA-ML Series Manual

3.5.3

SNTP Settings

Use the following window to implement the settings on SNTP (Simple
Network Time Protocol) and display its settings. Use the SNTP, and then
obtain a synchronization automatically and periodically between the
configuration of time and date for a switch and the settings hosted by an
SNTP server.
Choose System > Time and SNTP > SNTP Settings to display the
following window.
In the section of SNTP Global Settings, you can configure the following
parameters.
Parameter
SNTP State
Poll Interval
Click Apply to reflect the change.
In the section of SNTP Server Settings, you can configure the following
parameters.
Parameter
IPv4 Address
IPv6 Address
Click Add to add the new entry based on the information specified.
Click Delete to delete an entry.
Figure 3-18 SNTP Settings
This parameter enables or disables SNTP, globally.
Enter the synchronization-interval, in seconds.
The range of values is from 30 and 99,999 (seconds).
The default interval is 720 (seconds).
Enter an IPv4 address of an SNTP server.
Enter an IPv6 address of an SNTP server.
3.5.3 SNTP Settings
Overview
Overview
3 System
36