Trace Route - Panasonic GA-ML Series Manual

14.2.5

Trace Route

Use the following window to trace a route to either a destination IPv4/
IPv6 address or a domain-name and to perform a test for the network
connection.
Choose Tools > Trace Route from a tool-bar to display the following
window.
In the section of IPv4 Trace Route, you can configure the following
parameters.
Parameter
IPv4 Address
Domain-Name
Max TTL
Port
Time-out
Probe Number
Click Start to start the IPv4 trace-route.
Figure 14-24 Trace Route
Choose and enter a destination IPv4 address.
Choose and enter the domain-name of a destination.
The number of characters for it can be up to 255.
Enter the maximum value for Time-To-Live (TTL) of the
trace route request. This is the maximum number of
routers, which allow trace-route packets to pass (or
flow). The trace-route option passes while investigating
the network path between two devices. The range is
from 1 to 255 (hops).
Enter the port-number whose range is from 1 to
65,535.
Enter the time-out period while waiting for a response
coming from a remote device. The range is from 1 to
65,535 (seconds). The default value is 5 (seconds).
Enter the number of probe-times. The range is from 1 to
1,000. The default value is 1.
14.2.5 Trace Route
Overview
14 Tool Bar
428