Tacacs+Group Servers Settings - Panasonic GA-ML Series Manual

9.6.3

TACACS+Group Servers Settings

Use the following window to implement the settings on and display its
settings.
Choose Security > TACACS+ > TACACS+Group Servers Settings to
display the following window.
In the section of the TACACS+Group Servers Settings, you can
configure the following parameters.
Parameter
Name of Group
Servers
IPv4 IP Address
Click Add to add new entries.
Click Show Detail to display details on the entry.
Click Delete to delete the entry specified.
Click Show Detail to display the following window.
Figure 9-39 TACACS+Group Servers Settings (Show Detail.)
Figure 9-38 TACACS+Group Servers Settings
Enter the name of a TACACS+Group server. The
number of characters for the name can be up to 32.
Enter an IPv4 address of a TACACS+Group server
9.6.3 TACACS+Group Servers Settings
Overview
9 Security
.
325