Port Trust State And Mutation Binding - Panasonic GA-ML Series Manual

Hide thumbs Also See for GA-ML Series:

Table of Contents

Port Trust State and Mutation Binding

Use the following window to implement the settings on Port Trust State

and Mutation Binding and display its settings.

Choose QoS > Advanced Settings > Port Trust State and Port Trust

State Mutation Binding to display the following window.

Figure 7-8 Port Trust State and Mutation Binding

In the section of Port Trust State and Mutation Binding, you can

configure the following parameters.

From Port/ To Port

DSCP Conversion

Click Apply to check the content changed.

7.2.2 Port Trust State and Mutation Binding

Choose the port you use.

Choose the port trust state. The options available are

CoS and DSCP. The options available are CoS and

Choose and enter the name of a DSCP conversion map

to use. The number of characters for the name can be

up to 32. If you choose None, a DSCP conversion map

is not assigned to a port.

7 QoS (Quality of Service)

Show Quick Links

Table of Contents