Rmon History Settings - Panasonic GA-ML Series Manual

4.5.3

RMON History Settings

Use the following window to implement the RMON history settings on the
port specified and display its settings.
Choose Management > RMON > RMON History Settings to display the
following window.
In the section of RMON History Settings, you can configure the
following parameters.
Parameter
Port
Index
Number of Buckets
Interval
Owner
Click Add to add a new entry based on the information specified.
Click Delete to delete the entry.
Click Show Detail to display details on the entry.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 4-11 RMON History Settings
Choose the port you use.
Enter the index number of entries for a history group
table. The range is from 1 to 65,535.
Enter the number of packets, which are specified for a
RMON collecting history group of the statistics.
The range is from 1 to 65,535. The default value is 50.
Enter the interval-time for the cycle of each polling
The range is from 1 to 3,600 (seconds).
Enter the owner character strings; the number of
characters for the strings can be up to 127.
4 Management
4.5.3 RMON History Settings
Overview
64