Table of Contents
Advertisement
10.2 DDM (Digital Diagnostic Monitoring) 10.2.1 DDM Settings
In the section of DDM Shutdown Settings, you can configure the
following parameters.
Parameter
From Port/ To Port
State
Shutdown
Click Apply to reflect the change.
10 OAM (Operations, Administration & Management)
Choose the port you use.
This parameter enables or disables a DDM function on
the port specified.
Choose the shutdown operation. The value and option
to choose are as follows.
• Alarm - This option allows you to shutdown a port
when the value exceeds the range of the alarm
threshold configured.
• Warning - This option allows you to shutdown a
port when the value exceeds the range of the
warning threshold configured.
• None - This option does not make a port shutdown
regardless of when the value exceeds the threshold-
range. This is the default option.
Overview
370
Hide quick links:
Advertisement
Table of Contents
