Ip Source Guard; Ip Source Guard Port Settings - Panasonic GA-ML Series Manual

9.7.1.3

IP Source Guard

9.7.1.3.1

IP Source Guard Port Settings

Use the following window to implement the settings on an IP source
guard of the port specified and display its settings.
Choose Security > SAVI > IPv4 > IP Source Guard > IP Source Guard
Port Settings to display the following window.
You can configure the following parameters.
Parameter
From Port to Port:
from the Beggining
to the End
State
Verification
Click Apply to add a new entry.
9.7.1.3 IP Source Guard 9.7.1.3.1 IP Source Guard Port Settings
Figure 9-52 IP Source Guard Port Settings
Choose the port you use.
This parameter enables or disables the state of the IP
source guard for the port specified.
Choose a verification method of using. The options
available are as follows.
• IP - checks the IP address of the received packets.
• IP-MAC - checks the IP address and MAC address of
the received packets
Overview
9 Security
342