Rrp (Ring Redundant Protocol) - Panasonic GA-ML Series Manual

5.9

RRP (Ring Redundant Protocol)

Use the following window to implement the RRP settings and display its
settings.
Choose L2 Features > RRP to display the following window.
In the section of RRP Global State, you can configure the following
parameter.
RRP State
Click Apply to reflect the change.
In the section of the RRP Domain State, you can configure the following
parameter.
Domain Name
Click Create to create a new RRP domain.
Click Show Detail to display details on the entry.
Click Delete to delete the entry.
Click Show Detail to display the following window.
Parameter
This parameter enables or disables an RRP function.
Parameter
Enter the name of an RRP domain. The number the
character strings to specify can be up to 25. This domain
indicates a physical ring.
5.9 RRP (Ring Redundant Protocol)
Figure 5-72 RRP
Overview
Overview
5 L2 Features
175