Panasonic GA-ML Series Manual page 189

In the section of IP Settings, you can configure the following parameters.
Parameter
Method of Obtaining
IP
IP Address
Mask
Secondary
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Click the DHCP Client tab to display the following window.
Figure 6-8 IPv4 Interface (Edit and DHCP Clients)
In the section of DHCP Client, you can configure the following
parameters.
Parameter
DHCP Client
Client ID
Choose a method of obtaining an IP address.
The options available are as follows.
• Static - Enter an IPv4 address configuration of this
interface in the entry field provided, manually.
• DHCP - This interface automatically obtains the IPv4
settings from DHCP servers existing in a local
network.
Enter an IPv4 address of this interface.
Enter an IPv4 subnet mask of this interface.
If you set this option to on, use an IPv4 address and
mask secondary as the interface settings.
Enter an ID of a DHCP client. The range is from 1 to
4,094. Use this parameter to specify the VLAN
interface, which uses the hex notation of the MAC
address as a client ID for sending discover messages.
6.4 Interface 6.4.1 IPv4 Interface
Overview
Overview
6 L3 Features
187