Tacacs+ Server Settings - Panasonic GA-ML Series Manual

9.6.2

TACACS+ Server Settings

Use the following window to implement the settings on a TACACS+ server
and display its settings.
Choose Security > TACACS+ > TACACS+ Server Settings to display the
following window.
In the section of TACACS+ Server Settings, you can configure the
following parameters.
Parameter
IP Address
Port
Time-out
Key Type
Key
Click Apply to add a new entry.
Click Delete to delete the entry specified.
Figure 9-37 TACACS+ Server Settings
Enter an IPv4 address of a TACACS+ server.
Enter the port-number (value) you use. The range is
from 1 to 65,535. By default, the value is set to 49.
Enter the value of time-out. The range is from 1 to 255
(seconds). By default, the value is set to 5 seconds.
Choose the key type you use. The options available are
Plain-text and Encryption.
Enter a key to use for the communication with a
TACACS+ server. The number of characters for the key
can be up to 254.
9.6.2 TACACS+ Server Settings
Overview
9 Security
324