Egress Buffer Settings - Panasonic GA-ML Series Manual

7.3

Egress Buffer Settings

7.3.1
Use the following window to configure the threshold of output buffering
and display the threshold specified. Regarding the threshold of output
buffering, operating with the default configuration is recommended.
Egress Buffer changes the status to "High" regarding the environment
where the traffics instantaneously exceeding the maximum quantity of
communications for a port occur frequently.
Choose QoS > Egress Buffer Settings to display the following window.
In the section of Egress Buffer Settings, you can configure the following
parameter.
Threshold Settings
for Egress Buffer
Click Apply to reflect the change.
7.3 Egress Buffer Settings 7.3.1 Egress Buffer Settings
Egress Buffer Settings
Figure 7-22 Egress Buffer Settings
Parameter
Choose the threshold of an output buffering. The
options (values) available are Mid and High. If the value
is configured in advance, the threshold is displayed. The
default (or initial) value is Mid.
7 QoS (Quality of Service)
Overview
229