Mld Snooping Filter Settings - Panasonic GA-ML Series Manual

5.7.2.3

MLD Snooping Filter Settings

Use the following window to implement the settings on the MLD
Snooping filtering and display its settings.
Choose L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Filtering Settings to display the following window.
In the section of the settings on MLD Snooping Band Limitation, you
can configure the following parameters.
Parameter
From Port/ To Port
Number of
Limitations
Click Apply to reflect the change.
Figure 5-56 MLD Snooping Filter Settings
Choose the port you use. This is available only if you
select the Port option as the following action.
Enter the number of limitations. Use the number of
limitations to configure the rate of MLD control packets,
which can be processed by the Switch on a specific
interface. The range is from 1 to 1,000 (packets/per
second). If you choose No Limitation, the limitation is
removed (or deleted).
5.7.2.3 MLD Snooping Filter Settings
Overview
5 L2 Features
153