Acl Vlan Filter - Panasonic GA-ML Series Manual

8.5

ACL VLAN Filter

Use the following window to implement the settings on the ACL VLAN
filtering and display its settings.
Choose ACL > ACL VLAN Filter to display the following window.
In the section of ACL VLAN Filter, you can configure the following
parameters.
Access Map Name
Action
VID List
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page-numbers. Then click Go to
move to a specific page.
Figure 8-31 ACL VLAN Filter
Parameter
Enter an access-map name. The number of characters
for the name can be up to 32.
Choose the action you perform. The options available
are Add and Delete.
Enter the VLAN ID you use. You can enter its
consecutive VLAN IDs by delimiting with a comma or
enter the range of VLAN IDs by delimiting with a
hyphen. The range is from 1 to 4,094. If you choose All
VLANs, this configuration is applied to all the VLANs,
which are configured on this switch.
8 ACL (Access Control List)
8.5 ACL VLAN Filter
Overview
277