Mac Address Table - Panasonic GA-ML Series Manual

5.1.3

MAC Address Table

Use the following window to display and clear the entry of a MAC address
table.
Choose L2 Features > FDB > MAC Address Table to display the
following window.
In the section of the MAC Address Table, you can configure the
following parameters.
Parameter
Port
VID
MAC Address
Click the Clear Dynamic by Port button to clear all the dynamic MAC
addresses associated with the port specified.
Click the Clear Dynamic by VLAN button to clear all the dynamic MAC
addresses associated with the VLAN specified.
Click the Clear Dynamic by MAC button to clear the dynamic MAC
address specified from a table.
Click Find to search and display the entries in a table based on the search
condition specified.
Click Clear All to clear all the entries from a table.
Click See All to search and display all the entries available.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 5-6 MAC Address Table
Choose the port-number to configure.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Enter a MAC address to use for this settings.
5 L2 Features
5.1.3 MAC Address Table
Overview
86