Table of Contents
Advertisement
Parameter
Limiting a Band
Frequency
Click Apply to check the content changed.
Choose and enter the value of limiting a bandwidth.
• If you choose Bandwidth, enter the input/output
bandwidth to use in the entry field displayed.
• The range is from 8 to 40,000,000 (Kbps). Enter the
Burst-size value in the entry field displayed. The
range is from 0 to 128,000 (kilo-bytes).
• If you select Percent, enter the input/output
bandwidth using the unit as a percentage. The range
is from 1 to 100 (percent). Enter the Burst-size value
in the entry field displayed. The range is from 0 to
128,000 (kilo-bytes).
• If you select None, limiting a band frequency on the
specified port is removed. The specified limitation
cannot exceed the maximum speed of the interface
specified. In the case of the ingress bandwidth
limitation, the ingress sends pause frames or flow
control frames when the received traffics exceed the
limitation.
7 QoS (Quality of Service)
7.1.5 Port Rate Limiting
Overview
204
Hide quick links:
Advertisement
Table of Contents
