5.7.2.4
MLD Snooping Multicast Router Information
Use the following window to implement the settings on an MLD Snooping
Multicast router and display its settings.
Choose L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Multicast Router Information to display the following
window.
Figure 5-58 MLD Snooping Multicast Router Information
In the section of the port settings on MLD Snooping Multicast Router,
you can configure the following parameters.
Parameter
VID
Configuration
From Port/ To Port
Click Apply to add new entries based on the information specified.
Click Delete to delete entries based on the information specified.
In the section of a port table for MLD Snooping Multicast Router, you
can configure the following parameter.
Parameter
VID
Click Find to search and display the entries in a table based on the search
condition specified.
5.7.2.4 MLD Snooping Multicast Router Information
Enter the VLAN ID you use. The range is from 1 to
4,094.
Choose a port configuration. The options available are
as follows.
• Port - Ports configured are connected to a Multicast
corresponding router.
• Forbidden Port - Ports, which are configured, are
not connected to a Multicast corresponding router.
Choose the port you use.
Enter the VLAN ID you use. The range is from 1 to
4,094.
5 L2 Features
Overview
Overview
156