Policy Map - Panasonic GA-ML Series Manual

7.2.8

Policy Map

Use the following window to implement the settings on a policy map and
display its settings.
Choose QoS > Advanced Settings > Policy Map to display the following
window.
In the section of Create/Delete Policy Map, you can configure the
following parameter.
Parameter
Name of a Policy Map Enter the name of a policy map to create or delete. The
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
In the section of Traffic Policy, you can configure the following
parameters.
s
Parameter
Name of a Policy Map Enter the name of a policy map. The number of
Name of a Class Map
Click Apply to add a new entry.
Click Set Action to configure the action of the entries specified.
Click Policer to configure the police action for the entry specified.
Figure 7-16 Policy Map
number of characters for the name can be up to 32.
characters for the name can be up to 32.
Enter the name of a class map. The number of
characters for the name can be up to 32.
7 QoS (Quality of Service)
7.2.8 Policy Map
Overview
Overview
220