4.12. Line Configuration
Configure the Loop detection and blocking function and MNO series power saving
mode settings in "Interface configuration mode."
4.12.1. Loop Detection and Blocking Configuration
Enable or disable the Loop detection and blocking function and configure the
auto-recovery setting in "Interface configuration mode." Confirm the loop history
by entering "show line loopback history" in "Privileged mode."
Loop detection and blocking function enable command
Configuration mode
Loop detection and blocking function disable command
Interface configuration mode
Loop detection and blocking history delete command
Configuration mode
Loop detection and blocking function enable command
Interface configuration mode
Auto-recovery function enable command
Interface configuration mode
Auto-recovery function disable command
Interface configuration mode
Loop detection and blocking configuration display command
Privileged mode
Loop detection and blocking history display command
Privileged mode
line loopback enable
no line loopback
line loopback history clear
line loopback
line loopback shutdown <sec>
no line loopback shutdown
show line loopback configuration
show line loopback history
57