Firmware Backup To Rcp - Panasonic GA-ML Series Manual

14.2.1.8 Firmware Backup to RCP

Use the following window to save a backup copy of the firmware existing
in a switch into an RCP server.
Choose Tool > Firmware Upgrade & Backup > Firmware Backup to
RCP (Servers) on the tool-bar to display the following window.
Figure 14-9 Firmware Backup to RCP (Servers)
You can configure the following parameters.
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Backup to start performing a backup.
Enter an IP address of the RCP server.
Enter the user-name of the RCP connection. The
number of characters for the name can be up to 32.
Enter the source file-name and its path of a firmware file
in a switch. The number of characters for this field can
be up to 64.
Enter a destination file-name and its path of a firmware
file to be backed up into the RCP server. The number of
characters for this field can be up to 64.
14.2.1.8 Firmware Backup to RCP
Overview
14 Tool Bar
413