Arp Inspection Settings - Panasonic GA-ML Series Manual

9.7.1.2.2

ARP Inspection Settings

Use the following window to implement the settings on ARP inspections and
display its settings.
Choose Security > SAVI > IPv4 > Dynamic ARP Inspection > ARP
Inspection Settings to display the following window.
In the section of ARP Inspection Items, you can configure the following
parameters.
Src-MAC
Dst-MAC
Figure 9-48 ARP Inspection Settings
Parameter
This parameter enables or disables the source MAC
option. The option checks ARP requests, response
packets and the consistency between a source MAC
address in the Ethernet header and a sender MAC
address of the ARP payload.
This parameter enables or disables the destination MAC
option. The option checks ARP response packets and
the consistency between a destination MAC address in
the Ethernet header and a target MAC address in the
ARP payload.
9.7.1.2.2 ARP Inspection Settings
Overview
9 Security
336