Panasonic GA-ML Series Manual page 94

Parameter
Ether-type
Click Apply to add new entries based on the information specified.
Click Delete to delete the entry.
5.2.2 802.1v Protocol VLAN 5.2.2.1 Protocol VLAN Profile
Enter the Ethernet-type value of a group. Use the
protocol value to identify a protocol of the frame-type
specified. The range is from 0x0 to 0xFFFF. The octet
character strings includes one of the following values,
depending on a frame-type.
• Regarding Ethernet 2, it is the hex value (or
hexadecimal number) of 16 bits (2 octets).
• Set IPv4 to 0800, IPv6 to 86DD, and ARP to 0806.
• Regarding IEEE802.3 SNAP, it is the hex value of 16
bits (2 octets).
• Regarding IEEE802.3 LLC, it is a pair of IEEE 802.2
LSAP (Link Service Access Point) of 2 octets.
• The first octet is DSAP (Destination Service Access
Point) and the second octet is source.
5 L2 Features
Overview
92