7.2.5
DSCP Color Mapping
Use the following window to implement the settings on DSCP color
mapping and display its settings.
Choose QoS > Advanced Settings > DSCP Color Mapping to display the
following window.
In the section of the DSCP Color Mapping, you can configure the
following parameters.
Parameter
From Port/ To Port
DSCP List
Color
Click Apply to check the content changed.
Figure 7-11 DSCP Color Mapping
Choose the port you use.
Enter the value of DSCP list to map colors. The range is
from 0 to 63.
Choose the color option to map the DSCP value. The
options available are Green, Yellow and Red.
7 QoS (Quality of Service)
7.2.5 DSCP Color Mapping
Overview
211