Dscp Cos Mapping - Panasonic GA-ML Series Manual

7.2.3

DSCP CoS Mapping

Use the following window to implement the settings on a DSCP CoS
mapping and display its settings.
Choose QoS > Advanced Settings > DSCP CoS Mapping to display the
following window.
In the section of the DSCP CoS Mapping, you can configure the
following parameters.
Parameter
From Port/ To Port
CoS
DSCP List
Click Apply to check the content changed.
Figure 7-9 DSCP CoS Mapping
Choose the port you use.
Enter the CoS value for mapping the DSCP list. The
range of the value to choose is from 0 to 7.
Enter the DSCP list value to map the CoS value. The
range is from 0 to 63.
7 QoS (Quality of Service)
7.2.3 DSCP CoS Mapping
Overview
209