System Log Discriminator Settings - Panasonic GA-ML Series Manual

3.4.2

System Log Discriminator Settings

Use the following window to implement the settings on a discriminator
and display its settings.
Choose System > System Log > System Log Discriminator Settings to
display the following window.
Figure 3-11 System Log Discriminator Settings
In the section of the Discriminator Log Settings, you can configure the
following parameters.
Parameter
Discriminator Name
Action
Severity
Click Apply to add a new entry based on the information specified.
Click Delete to delete the entry.
3.4.2 System Log Discriminator Settings
Enter the name of a discriminator profile. The number
of characters can be up to 15.
Choose the facility operation option and a facility type
to associate them with an operation selected. The
options available as an operation are dispose (or
discard) and include.
Choose the operation option and the severity of the
information type, which is logged. The options available
as an operation are dispose and include. The values to
choose severity: 0(Emergencies), 1(Alerts),
2(Critical), 3(Errors), 4(Warnings), 5(Notification),
6(Information) and 7(Debugging).
Overview
3 System
27