Radius (Remote Authentication Dial-In User Service); Radius Global Settings - Panasonic GA-ML Series Manual

9.5 RADIUS (Remote Authentication Dial-In User Service) 9.5.1 RADIUS Global Settings
9.5 RADIUS (Remote Authentication Dial-In User
Service)
9.5.1
Use the following window to implement the global settings, which is
associated with the RADIUS function, and display its settings.
Choose Security > RADIUS > RADIUS Global Settings to display the
following window.
In the section of RADIUS Global Settings, you can configure the
following parameter.
Dead Time
Click Apply to reflect the change.
In the section of RADIUS Global IPv4 Source Interface, you can
configure the following parameter.
IPv4 RADIUS Source
Interface Name
Click Apply to reflect the change.

RADIUS Global Settings

Figure 9-31 RADIUS Global Settings
Parameter
Enter the dead-time value. If the system implements an
authentication by using an authentication server, it
attempts a server one by one. If the server does not
respond, the system attempts the next server.
If the system finds a server that does not respond, it
marks the server as a down server to start the dead time
timer. The server on this state is skipped until the dead
time passes in the following request authentication. The
range is from 1 to 1440 (minutes). By default, this value
is set to 0 (minute). If this option is 0, the unresponsive
server is not marked as dead. Use this settings to
shorten the time needed for an authentication
processing by configuring the dead time to skip the
unresponsive server host-entry.
Parameter
Enter the name of the IPv4 RADIUS source interface.
Overview
Overview
9 Security
317