Ddm Tx Power Threshold Settings - Panasonic GA-ML Series Manual

10.2.5

DDM TX Power Threshold Settings

Use the following window to implement the settings on DDM TX power
threshold of the port specified and display its settings.
Choose DDM > DDM TX Power Threshold Settings to display the
following window.
Figure 10-6 DDM TX Power Threshold Settings
In the section of DDM TX Power Threshold Settings, you can configure
the following parameters.
Parameter
Port
Action
Type
Power Unit
Value
Click Apply to reflect the change.
10 OAM (Operations, Administration & Management)
10.2.5 DDM TX Power Threshold Settings
Choose the port you use.
Choose the action you perform. The options available
are Add and Delete.
Choose the threshold type of a transmission power. The
options available are Low Alarm, Low Warning, High
Alarm and High Warning.
Choose the power unit. The options available are mW
and dBm.
Enter the threshold.
• If you specify the threshold with mW unit, the range
is from 0 to 6.5535 (mW).
• If you specify the threshold with dBm unit, the range
is from -40 to 8.1647 (dBm).
Overview
374