Igmp Snooping Filter Settings - Panasonic GA-ML Series Manual

5.7.1.3

IGMP Snooping Filter Settings

Use the following window to implement the settings on the IGMP
Snooping filtering and display its settings.
Choose L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Filter Settings to display the following window.
In the section of the settings on IGMP Snooping Bandwidth Limit, you
can configure the following parameters.
Parameter
From Port to Port:
from the Beggining
to the End
Number of
Limitations
Click Apply to reflect the change.
Figure 5-48 IGMP Snooping Filter Settings
Choose the port you use. This is available only if you
choose the port option for the following action.
Enter the number of limitations. Configure the rate of
IGMP control packets, which can be processed on a
specific interface by a switch. The range is from 1 to
1,000 (packets/per second). If you choose No
Limitation, the limitation is removed.
5.7.1.3 IGMP Snooping Filter Settings
Overview
5 L2 Features
139