3.3
Port Settings
3.3.1
Use the following window, and then implement the port settings on the
switch to display its settings.
Choose System > Port Configuration > Port Settings to display the
following window.
In the Port Settings section, you can configure the following parameters.
From port -
To Port
Selecting a Media
Media Type
State
Port Settings
Parameter
Choose the port you use.
Choose a media type for ports. The options available are
Automatic, RJ45 and SFP. SFP stands for Small Form-
Factor Pluggable.
Choose a media type for ports. The options available are
RJ45 and SFP.
This parameter enables or disables a physical port.
3.3 Port Settings 3.3.1 Port Settings
Figure 3-3 Port Settings
Overview
3 System
15