Panasonic GA-ML Series Manual page 292

Parameter
Server Time-out
Re-authentication
Period
Maximum Request
Re-authentication
Time Local
Per-Port
Re-authentication
Forced
Authentication
Timeout
Click Apply to check the content changed.
Click Show to display the settings on MAC-based access control, which is
associated with the specified port(s).
Click Init to initiate the settings on Mac-based access control on the
specified port(s).
Click Re-authenticate to re-authenticate all the connections to the
specified port(s).
Click Show Detail to display details on the entry.
Enter the value of the server time-out. This is the
number of seconds needed to wait for the response
coming from an authentication server. If this period
passes, the connection becomes time-out. The range is
from 1 to 65,535 (seconds).
Enter the re-authentication period. This is the number of
seconds for the interval of re-authentication attempts.
The range is from 1 to 65,535 (seconds).
Enter the maximum number of EAP requests, which are
allowed from a back-end authentication machine.
When exceeding this, an authentication process
restarts. The range is from 1 to 10.
This parameter enables or disables the use of the local
settings for the session re-authentication done by a
timer.
This parameter enables or disables the regular re-
authentication on the port(s) specified.
Enter the value of the forced authentication timeout.
This is the number of seconds for a switch to wait for
the migration to forced authentication/un-
authorization. If this period passes, the migration
becomes time-out. The range is from 0 to 65,535
(seconds). To avoid that the migration becomes time-
out, enter 0 for it.
9.2.4 802.1X Ports Settings
Overview
9 Security
290