Multicast Static Fdb - Panasonic GA-ML Series Manual

5.1.1.2

Multicast Static FDB

Use the following window to implement the settings on Multicast static
FDB and display its settings.
Choose L2 Features > FDB > Static FDB > Multicast Static FDB to
display the following window.
2
In the section of Multicast Static FDB, you can configure the following
parameters.
Parameter
From Port/ To Port
VID
MAC Address
Click Apply to add new entries based on the information specified.
Click Delete all to delete all the entries.
Click Delete to delete the entry.
If two or more pages exist, enter the page-numbers. Then click Go to
move to a specific page.
Figure 5-2 Multicast Static FDB
Choose the port you use.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Enter a MAC address of the static destination for
Multicast packets. Specify the Multicast MAC address
for this address.
5 L2 Features
5.1.1.2 Multicast Static FDB
Overview
82