Aaa Authentication User Settings - Panasonic GA-ML Series Manual

9.3.3

AAA Authentication User Settings

Use the following window to implement the settings on AAA
authentication users and display its settings.
Choose Security > AAA > AAA Authentication User Settings to display
the following window.
Figure 9-17 AAA Authentication User Settings
In the section of AAA Authentication User Settings, you can configure
the following parameters.
Parameter
User Name
VLAN ID
Password
Encrypted Password
Authentication Type
2-Step
Authentication
9.3.3 AAA Authentication User Settings
Enter the user-name of a local authentication account
The number of characters for the name can be up to 32.
Enter a target VLAN ID for a local authentication
account. The range is from 1 to 4,094.
Choose and enter the clear-text password for the local
authentication account. Choose the Encrypt option to
enable password encryption for this account. The clear-
text password is saved as the encrypted form on the
switch.
Choose and enter the encrypted password for the local
authentication account.
Choose the authentication type. The options available
are as follows.
• Both - Uses a local authentication account for IEEE
802.1X and Web authentication.
• Web - Uses a local authentication account for the
Web authentication, only.
• Dot1X - Uses the local authentication account for
IEEE 802.1X authentication, only
This parameter enables or disables the 2-step
authentication.
Description
9 Security
.
302