Igmp Snooping Group Settings - Panasonic GA-ML Series Manual

5.7.1.2

IGMP Snooping Group Settings

Use the following window to implement the settings on an IGMP
Snooping group and display its settings.
Choose L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Group Settings to display the following window.
In the section of Static Group Settings on IGMP Snooping, you can
configure the following parameters.
Parameter
VID
Group Address
From Port/ To Port
Click Apply to add new entries based on the information specified.
Click Delete to delete the entries based on the information specified.
In the section of IGMP Snooping Static Group Table, you can configure
the following parameters.
Parameter
VID
Group Address
Click Find to search and display the entries in a table based on the search
condition specified.
Figure 5-47 IGMP Snooping Group Settings
Enter VLAN IDs to use. The range is from 1 to 4,094.
Enter a group address of IP Multicast.
Choose the port you use.
Choose and enter VLAN IDs to use. The range is from 1
to 4,094.
Click the radio button, and then enter an address of an
IP Multicast group.
5.7.1.2 IGMP Snooping Group Settings
Overview
Overview
5 L2 Features
137