Snmp User Table Settings - Panasonic GA-ML Series Manual

4.4.3

SNMP User Table Settings

Use this window to implement the SNMP user settings and display its
settings.
Choose Management > SNMP > SNMP User Table Settings
to display the following window.
In the section of SNMP User Settings, you can configure the following
parameters.
Parameter
User Name
Group Name
SNMP Version
SNMP V3 Encryption
Password-
Authentication
Protocol
Figure 4-6 SNMP User Table Settings
Enter an SNMP user-name. Use this user-name to
identify the SNMP user. The number of characters can
be up to 32 for the user-name.
Enter the name of SNMP group of users. The number of
characters can be up to 32 for the group name. Do not
use any spaces.
Choose an SNMP version. The values to choose are v1,
v2c and v3.
After choosing v3 from SNMP version, choose the
encryption type for SNMPv3. The options available are
None, Password and Key.
After choosing v3 from SNMP version and Password
from SNMP V3 Encryption, choose the password
authentication protocol. After choosing Password
from SNMP V3 Encryption, choose a password
authentication protocol. The options available are as
follows.
• MD5 - Use an authentication level of HMAC-MD5-
96. You need to enter a password or a key in the
field.
• SHA - Use an authentication protocol of HMAC-SHA.
• You need to enter a password or a key in the field.
4 Management
4.4.3 SNMP User Table Settings
Overview
56