Counters - Panasonic GA-ML Series Manual

11.2.3

Counters

Use the following window to display and clear the link-change counters of
the port specified.
Choose Monitoring > Statistics > Counters to display the following
window.
In the section of Counters, you can configure the following parameter.
Parameter
From Port/ To Port
Click Find to display the information on the link-change counters
regarding the specified port(s).
Click Refresh to refresh the information displayed in the table above.
Click Clear to clear the information on the link-change counters
regarding the specified port.
Click Clear ALL to clear information on all the link change counters.
Click Show Detail to display details on the entry.
Figure 11-6 Counters
Choose the port you use.
11 Monitoring
11.2.3 Counters
Overview
394