1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Switch
  5. GA-AS12TPoE+ Series
  6. Installation manual

Panasonic GA-AS12TPoE+ Series Installation Manual

Switching hub
Hide thumbs Also See for GA-AS12TPoE+ Series:
Table of Contents

Advertisement

Quick Links

Download this manual

Installation Guide

 Thank you for purchasing our product.
 This document provides important information about safe and proper
operations of this Switching Hub.
 Please read the "Important Safety Instructions" on pages from 3 to 5.
 Any problems or damage resulting from disassembly of this Switching Hub
by customers are not covered by the warranty.
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
GA-AS12TPoE+
Model No.
2019
PN25128-TH
PN25128-MY
PN25128-ID
PN25128-SG
I0916-20719
Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Panasonic GA-AS12TPoE+ Series

Summary of Contents for Panasonic GA-AS12TPoE+ Series

  • Page 1: Installation Guide

    GA-AS12TPoE+ Installation Guide PN25128-TH Model No. PN25128-MY PN25128-ID PN25128-SG  Thank you for purchasing our product.  This document provides important information about safe and proper operations of this Switching Hub.  Please read the "Important Safety Instructions" on pages from 3 to 5. ...

  • Page 2: Table Of Contents

    Contents Important Safety Instructions Basic Instructions for the Use of This Product 1 Product Outline 1.1 Features 1.2 Specifications 1.3 Accessories 1.4 Basic operation 2 Part Names and Functions 3 Installation and Configuration 3.1 Grounding Cable Connection 3.2 Mounting to rack 3.3 Mounting on a wall 3.4 Configuration of IP address (Basic) Troubleshooting...

  • Page 3: Important Safety Instructions

    Important Safety Instructions This chapter contains important safety instructions for preventing bodily injury and/or property damage. You are required to follow them.  Severity of bodily injury and/or property damage, which could result from incorrect use of the Switching Hub, are explained below. WARNING This symbol indicates a potential hazard that could result in serious injury or death.
  • Page 4 WARNING  Do not install this Switching Hub at the location with continuous vibration or strong shock, or at the unstable location. Deviation could lead to falling, injury and/or equipment failure.  Do not put this Switching Hub into fire. Deviation could lead to explosion and/or fire.
  • Page 5 CAUTION  This Switching Hub is to be periodically serviced in order to maintain its performance. Please choose a product administrator, and have them be sure to implement periodic maintenance. When doing maintenance, check the inspection chart that is posted on our website which has the requisite items listed on it. ...

  • Page 6: Basic Instructions For The Use Of This Product

     When using two Switching Hubs, do not stack them. When you place them side by side, allow for a space of 20 mm or more between them. 1. Please note that Panasonic shall not bear any liability whatsoever for any damages (this shall include lost earnings, lost opportunities, etc. but this is not restricted to these...

  • Page 7: Product Outline

    Product Outline GA-AS12TPoE+ has 14 ports which are 10BASE-T/100BASE-TX/1000BASE-T compatible ports. Ports 1 to 12 (twisted pair ports) support IEEE802.3at PoE power supply functions. 1.1 Features  Ports 1 to 14 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-T corresponding to auto-negotiation.  The twisted pair ports 1 to 12 can supply power conforming with IEEE802.3at. They can supply a maximum of 30 W of power per port, and the device total can supply a maximum of 84 W of power.

  • Page 8: Specifications

    Product Outline 1.2 Specifications Interface Twisted pair port 1–14: RJ45 connector Transmitting and receiving network system IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE802.3ab 1000BASE-T Energy Efficient Ethernet function IEEE 802.3az (LP1) Switching mode Store and Forward method: Forwarding rate 10BASE-T: Max.

  • Page 9: Accessories

    1.3 Accessories Please be sure to confirm the content. Please contact our distributor if any of the contents are insufficient. Quantity  Installation Guide (this document) 1 (*)  CD-ROM (PDF version of Operating Instructions)  Rubber foot  Power cord * Just the PN25128-TH has 1 Installation Guide in Thai (a total of 2 guides).

  • Page 10: Part Names And Functions

    Part Names and Functions 10BASE-T/100BASE-TX/1000BASE-T port Front panel MAC Address label Power cord hook block Back panel Power port Ground terminal Serial number label  Power port Connect the supplied power cord to this port and connect the other end into an electric outlet.
  • Page 11 POWER (Power) LED STATUS (status) LED PoE LIM. (PoE limit) LED  POWER (Power) LED Green Light : Power is ON. : Power is OFF.  STATUS (status) LED Green Light : System is normally operating Green Blink : After powering on, and the system startup is completed, blinks for five minutes Orange Light : System is starting up...

  • Page 12: Installation And Configuration

    Installation and Configuration 3.1 Grounding Cable Connection The chassis of the equipment must be grounded properly so that the lightning can flow to the ground, which improves the capability of the chassis for resisting the electromagnetic interference. 1. Ensure that the grounding cable is connected correctly so that the equipment is protected against lightning and interference.

  • Page 13: Mounting To Rack

    3.2 Mounting to rack Use the two 19-inch rack mount brackets and eight screws (for fixing the rack mount brackets to the Switching Hub) supplied with the mount brackets PN71051 (optional) to fix the mount brackets to the four holes on each side of the Switching Hub. Then securely install the Switching Hub onto the rack using the four screws (for a 19-inch rack mount) supplied with the mount brackets PN71051 (optional) or the screws supplied with the rack.

  • Page 14: Mounting On A Wall

    Installation and Configuration 3.3 Mounting on a wall Use the two wall mount brackets and eight screws (for fixing the wall mount brackets to the Switching Hub) supplied with the mount brackets PN71053 (optional) to fix the mount brackets to the four holes on each side of the Switching Hub. Then securely install the Switching Hub onto the wall using the four screws which have been prepared by the customer.

  • Page 15: Configuration Of Ip Address (Basic)

    3.4 Configuration of IP address (Basic) (1) Directly connect the computer which has ZEQUO assist Plus installed on it from the CD-ROM and this device via twisted pair cables, or connect the computer and this device to the TCP/IP network in the broadcast domain which the L3 switch routers do not go through, and start up ZEQUO assist Plus.
  • Page 16 Installation and Configuration Screen 2 Screen 3 Screen 4 * Please see the Operating Instructions PDF on the CD-ROM in regard to settings and administration methods other than those for the IP addresses.

  • Page 17: Troubleshooting

    Troubleshooting If you find any problem, please take the following steps to check.  LED The POWER (Power) LED is not lit.  Check if the power cord is disconnected. Please confirm that the power cord is securely connected to the power port. ...
  • Page 18 Troubleshooting  PoE power supply is impossible. Power is not supplied to a Powered Device.  If you use an STP cable, PoE power supply may not be possible depending on the installation environment. In such cases, use a UTP cable. ...

This manual is also suitable for:

Ga-as12tpoe+ pn25128-myGa-as12tpoe+ pn25128-idGa-as12tpoe+ pn25128-sgGa-as48tpoe+ seriesGa-as48tpoe+ pn25488-myGa-as48tpoe+ pn25488-th ... Show all

Table of Contents