Mac Notification - Panasonic GA-ML Series Manual

5.1.4

MAC Notification

Use the following window to implement the settings on a global MAC
notification and MAC notification of the port specified and display its
settings.
Choose L2 Features > FDB > MAC Notification to display the following
window.
Figure 5-7 MAC Notification (MAC Notification Settings)
In the section of MAC Notification Global-Settings, you can configure
the following parameters.
Parameter
MAC Address
Notification
Interval
History Size
State of
MAC Notification
Trap
From Port/ To Port
Adding Traps
Removing Traps
Click to reflect the change.
Apply
Choose the MAC Notification History tab to display the following
window.
This parameter enables or disables to set the MAC
notification to global, on the switch.
Enter the time (value) needed for the notification
interval whose range is from 1 to 2,147,483,647
(seconds). By default, the value is set to 1 (second).
Enter the maximum number (value) of the entries to
display a list for the history-log, which is used for the
notification. The range is from 0 to 500. By default, the
value is set to 1.
This parameter enables or disables the state of MAC
notification-traps.
Choose the port you use.
This parameter enables or disables
port selected.
This parameter enables or disables to remove traps from
the port selected.
5 L2 Features
5.1.4 MAC Notification
Overview
to
add traps on the
87